Adirondack Chairs - The Best Built Adirondack Chair
Online
|
|||||||||||||||||||||||||||||||||
|
|
|
The Finest Chairs Built By Hand and Made In The USA !!! You may find a chair made from more expensive wood, and you may find a chair for a cheaper price, but you CAN'T find a stronger built chair available online today. Guaranteed!
Putting Your Chair Together
| You will need a
philips head screwdriver, a 7/16 box wrench, a 9/16 box wrench and maybe a small hammer. DO NOT OVER TIGHTEN ANY OF THE SCREWS. The front leg bolts should
not be fully tightened until the
Assemble the 2 legs ( 4 ) to the front of the seat ( 1 ) by putting the 4 large bolts thru the front leg and into the seat. A 9/16" wrench, socket or adjustable wrench will tighten these bolts. You may need to tap them in with a small hammer. *** DO NOT TIGHTEN THESE BOLTS ALL THE WAY UNTIL CHAIR IS FULLY ASSEMBLED ***
Assemble the arms ( 3 ) to the legs using 8 of the wood screws given.
The back ( 2 ) will slide below the arms paddles and into the pre-drilled holes on the legs. 4 ( 1/4" ) bolts with nuts will attach the arm paddles to the back. 2 1/4" lag bolts without nuts will screw the back down to the legs. The bottom bolts for the back that attach the back to the seat legs are the full threaded lag bolts that do not take a nut. Start these bolts in the holes on the back bottom before slipping the back into the waiting chair. Put these bolts in with a 7/16 wrench and do not tighten too much, just snug down. Please have patience, these bolts have been in the holes already and are long for a reason. DO NOT OVER TIGHTEN!
ANY
QUESTIONS FEEL FREE TO CALL
|
||||||||||||||||||||||||||||
adirondack chairs - adirondak chairs - adirondack fish chairs
adirondack chair plans and chair plans in general
